Your furnace is an integral part of your home. Without one, you wouldn’t be able to stay warm during cold weather. Yet furnaces can have some problems that are more common than others.

Let’s go over these problems and discuss what they might cost to fix so you know before you call an HVAC technician. Some of the most common furnace repair issues involve:

  • Furnace won’t turn on
  • Furnace doesn’t stay lit
  • Furnace won’t blow hot air
  • Furnace won’t turn off

1. The Furnace Isn’t Turning On

There are a few reasons why your furnace won’t turn on, so make sure to check all of them.

  • Is your thermostat set correctly? Make sure it’s set to “heat,” “auto” and that your preferred temperature is higher than the room’s current temperature. If you have a programmable thermostat, make sure it has new batteries.
  • Is the circuit breaker tripped? Your furnace can’t operate if it doesn’t have power. Reset the switch if it’s facing the outside of the electrical panel.
  • Is the furnace switch off? Your furnace has a power switch found on or close to it. Since this switch resembles a light switch, it’s easy to unintentionally turn it off. If it was off, it might take your furnace a few minutes to turn on.
  • Is the air filter clean? A dusty air filter can cause a lot of issues for your furnace. Get a new one if you can’t see light through it.

Estimated Repair Cost

This issue can be complicated, so the estimated cost to repair it depends on what’s wrong.

2. My Furnace Ignition System Isn’t Working

Your furnace uses a certain sequence when it starts heating your home.

  1. Your thermostat detects the temperature has dropped and tells your furnace to turn on.
  2. The draft inducer fan activates to pull in fresh air for combustion.
  3. The gas valve unlocks for the burners, which are lit electronically.
  4. The flame sensor tells your furnace the burners have been ignited.

If something is wrong during the sequence, your furnace will shut off as a safety precaution.

A couple of possible causes for this issue include:

  • Dirty or malfunctioning flame sensor. If the sensor doesn’t sense a flame, it will turn off your furnace to keep natural gas from getting into your home. The ignition process corrodes flame sensors as time passes. While cleaning during annual furnace maintenance can help, yours may ultimately need to be taken out and changed.
  • Bad limit switch. This safety feature will shut off your furnace if it detects backdrafting. Backdrafting is dangerous, because carbon monoxide and natural gas can leak into your home. These switches can malfunction due to age, damage or dust accumulation.
  • Old thermostat. If your thermostat isn’t working correctly, your furnace won’t be able to operate.
  • Dirty air filter. A dirty air filter can reduce airflow and cause your furnace to shut off to prevent overheating. Make sure to replace yours every 30 to 90 days, or whenever you can’t see light through it.

Estimated Repair Cost

These costs are estimates, so it’s important to note yours may vary based on your furnace’s brand and model.

  • Flame sensor: $350–$500
  • Limit switch: $150–$300
  • Thermostat: $150–$350
  • Furnace filter: $10-$30

3. My Furnace Won’t Blow Hot Air

In many instances, this problem is linked to an incorrect thermostat setting or a dirty air filter that’s limiting airflow. Follow the steps above to resolve the problem.

4. My Furnace Can’t Stop Running

If it’s extremely chilly outside or you like your home to be toasty, your furnace may be working for a long time.

If this isn’t the case, make sure your thermostat is set correctly and working properly. If your fan setting is at “on,” the blower motor will be running even when the furnace isn’t, so it’ll sound like your furnace is on all the time.

Otherwise, there might be a problem with the blower motor or your ductwork may be leaking air, forcing your furnace to run continuously to make up for the air loss.

Estimated Repair Cost

These costs are estimates, so it’s necessary to note yours may be different based on your furnace’s brand and model.

  • New blower motor: $250–$800
  • Seal ductwork: varies based on house size

Franklin's Heating & Air Conditioning, Inc Can Solve Your Furnace Problems as Soon as Possible

Furnace issues can be an expensive headache, but not when you call Franklin's Heating & Air Conditioning, Inc. We’ve been delivering the quality, affordable furnace repair Oxford homeowners have trusted since year. Contact us at 662-281-1231 to request your free estimate today.